Laney
OPERATING INSTRUCTIONS
SERIAL NO:
Displays the model and serial number of the unit.
EFFECTS LOOP RETURN:
Connect the output from your external effects to this socket. The effects loop allows you to
connect external effects such as tremolos, chorus and delays to your amplifier. A portion of the signal leaves the amplifier via
the `Send’ socket and comes back from the effects via the `Return` socket. Use the output level control on your FX to control
how loud the FX return signal sounds.
EFFECTS LOOP SEND:
Connect the input of your external effect to this socket A ‘side chain’effects loop allows you to
connect external effects such as tremolos, chorus and delays to your amplifier. Signal leaves the amplifier via the `Send’ socket
and comes back from the effects via the `Return` socket. Some Effects are better suited to being between the guitar and
amplifer input - these are foot pedal types / distortion / wah wah pedals etc. Rack mount effects will work better in the FX
loop on the amplifer rear. Stomp boxes are normally designed for small signals such as a guitar output whereas rack mount FX
are designed for the higher signal level obtained from an FX send.
FOOTSWITCH SOCKET:
Provided for the connection of the included Laney FS2 footswitch.This allows you to remotely
switch between the clean/drive channel and switch the built in reverb On/Off.
Page 9 /16
L
1
5T
-
12
The L5T-112 is factory fitted with a unique Tilting Mechanism, allowing the cabinet to be used either in the upright or tilted
back position. Please ensure the amp is on a stable level surface before using in the tilted position.
Lionheart products use only the best available build techniques and components to produce that perfect sound. This includes
the loudspeakers which are selected for their tonal quality. Because these speakers are hand made, using vintage style materials
which are acknowleged to give the best guitar sounds, they will take several hours of playing to settle down to their optimum
sound.
