background image

POWER:  

Main power switch for unit.

Use to connect an 8-16 ohm extension cabinet.  Please note mismatched impedance will reduce 

the amplifiers performance and in some cases may cause damage to your amplifier.  Set the switch to the 8 ohm when using 
only the internal loudspeaker,  switch to the 4 ohm setting when connecting to an additional 8 ohm cabinet. Try the L5T-112 
into a Laney Lionheart LT-212 cabinet - you will be amazed what this little baby cranks out.  Note: If the onboard loudspeaker 
jack is removed, an 8 ohm cabinet can be connected directly to the 8 ohm socket.

POWER INLET SOCKET.

  Connect to your power source.  Make sure the specified voltage is correct for your country!  

POWER FUSE:

 This drawer contains the main safety fuse for the unit.  The fuse protects the AC power to the amplifier.  

USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL.  If a fuse blows or fails and a 
replacement of the same size and rating is installed and it in turn blows, the amplifier has suffered a malfunction internally and 
needs immediate service from a qualified technician.  DO NOT TRY USING A FUSE OF HIGHER RATING.  Using a fuse that 
is too large in current rating may cause serious, irreparable damage to the amplifier and presents a serious fire hazard.  The 
mains fuse ratings are detailed in the specs section at the rear of this manual

HT FUSE: 

 This fuse protects the DC power to the tubes within the amplifier.  USE ONLY THE CORRECT SIZE AND 

RATING FUSE AS SPECIFIED ON THE PANEL.  If a fuse blows or fails and a replacement of the same size and rating is 
installed and it in turn blows, the amplifier has suffered a malfunction, at this point check the output tubes and replace faulty 
ones if required.  Should tubes not be the problem the amplifier should be checked out by a qualified technician.  Do not try 
using a fuse of greater value.  Using a fuse that is too large in current rating may cause serious, irreparable damage to the 
amplifier.  Fuses are designed to protect, do not take chances. 

EXTENSION CABINET:

  

Laney

                  OPERATING INSTRUCTIONS

11

33

22

44

55

66

77

88

Page 8 /16

L5T - 112 REAR

L

T

1
5

-

12

99

Summary of Contents for Lionheart L5T-112

















Reviews: