READY FOR OPERATION
To Charge the Battery for First Use
1. Connect the charger to standard 110 - 240 volt outlet; a red light should appear on the
charger.
NOTE: Always connect charger to standard 110 - 240 volt outlet before connecting battery.
2. Fully insert the charging plug into the battery card slot until the battery button bounces up.
(See Fig. 1 & Fig. 2)
3. Charge the battery until the light on the charger turns solid green.
4. Press the battery button, pull out the charging plug, remove the three-pronged plug from the
outlet, and then disconnect the battery from charger.
5. Press the battery capacity display button, check the battery capacity through LED light.
NOTE: Do not leave the battery on the charger after the charge is completed. Unplug the
charger from the outlet, and then remove the battery.
IMPORTANT
BATTERY MUST BE FULLY CHARGED BEFORE FIRST USE.
E1
Item No.
LAB01
BL482
BL481
LAB01-040
LAB01-030
LAB01-032
LAB01-031
LAB01-029
LAB01-041
Description
Power head (2Ah battery included)
4Ah Lithium Ion Battery
2Ah Lithium Ion Battery
4" Earth Auger
6" Earth Auger
8" Earth Auger
6" Ice Auger
8" Ice Auger
10" Ice Auger
Dimension
20.7"x12.8"x13.6"
6.5"x7"x5"
6.5"x7"x3.5"
30"x4.7"x4.7"
30"x6.7"x6.7"
30"x8.7"x8.7"
41"x6.7"x6.7"
41"x8.7"x8.7"
41"x10.6"x10.6"
Net/Gross Weight
15/18 lbs
3/4 lbs
1.8/2.5 lbs
5.5/7.5 lbs
7.7/10 lbs
10/12 lbs
7.7/10 lbs
10/12 lbs
12/14.5 lbs
SPECIFICATIONS
Charging Plug
Three-Pronged Plug
Lithium Battery
Capacity Display Button &
Battery Status Indicator
Fig.1
Fig.2
