background image

TECHNICAL DETAILS

Technical changes excepted.

IMPORTANT SAFETY INFORMATION

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey 

all safety messages that follow this symbol to avoid possible injury or death.

DANGER 

indicates a hazardous situation which, if not avoided, will result in 

death or serious injury.

WARNING

 indicates a hazardous situation which, if not avoided, could result in 

death or serious injury.

CAUTI0N 

used with the safety alert symbol, indicates a hazardous situation 

which, if not avoided, could result in minor or moderate injury.

NOTICE

 is used to address practices not related to personal injury.

CAUTION

 without the safety alert symbol, is used to address practices not 

related to personal injury.

WARNING!

 Read all instructions. Failure to follow all instructions listed below 

may result in fire, serious injury and/or DEAT DEATH.

The warnings and precautions discussed in this manual cannot cover all possible conditions 

and situations that may occur. It must be understood by the operator that common sense and 

caution are factors which cannot be built into this product, but must be supplied by the 

operator.

SET UP PRECAUTIONS

1. Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage 

and handling procedures. Do not store fuel or other flammable materials nearby.

2. Have multiple ABC class fire extinguishers nearby.

3. Operation of this equipment may create sparks that can start fires around dry vegetation. A 

spark arrestor may be required. The operator should contact local fire agencies for laws or 

regulations relating to fire prevention requirements.

4. Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator 

during set up.

5. Use only oil and fuel recommended in the "Specifications" section of this manual.

E1

Engine type 
Displacement 
Engine power
Starter
Ignition system 
Fuel tank capacity
Mixing ratio gasoline:oil
Drill length
Drill diameters
Reduction gear ratio
weight (without drill)

2-stroke
51,7cc
1.3kw/7000rpm
hand pull
electronic
1L
30:1
760mm
200mm
30:1
8.5 kg

Summary of Contents for GUO021-FBA









Reviews: