IMPORTANT SAFEGUARDS
For your own safety, always follow these basic precautions when using
this appliance.
1. Read the user Manual carefully for operating instructions. Read all instruc-
tions in this manual before use.
2. DO NOT use this product for anything other than its intended purpose.
3. DO NOT use attachments other than those available from the manufacturer.
4. DO NOT alter this product in any manner; doing so is dangerous and will void
all warranties.
5. DO NOT allow children or adults weighing under 100 lbs. to operate this unit.
6. DO NOT allow your body, loose clothing, drawstrings, scarves, hats or other
materials to touch the power head, or auger (drill) unit at any time.
7. DO NOT operate under the influence of drugs or alcohol.
8. DO NOT continue to use this product in the event of mechanical or electrical
failure.
9. The blades are very sharp. Use extreme caution when drilling a hole or
replacing the blades. Put the blade guard on after each use.
10. This product produces considerable cutting force that is felt by the operator.
Make sure your feet are firmly planted and the handles are firmly held while
operating this product.
11. During operation, the auger unit could possibly stop. Be prepared at any
time to release the buttons.
12. Check cutting blades and auger shaft screws before and after each use to
make sure they are tight.
13. The battery must be removed before any repairs.
14. When drilling the holes, do not push down on the unit. If auger begins to drill
slowly, blades may need to be sharpened or replaced.
15. When drilling, do not push down too hard. It may bring great load to the unit
and the overload protector will work to stop the unit.
16. In case of getting stuck during the drilling, it may hit big rocks or roots. Do
not continue drilling. Take out rocks or roots, or drill in another place.
17. DO NOT discard the battery into trash can. Discard the battery according to
your local, state, federal or country's regulations.
