L&W Compressors LW 720 E Operating Instructions Manual Download Page 15

Page: 15 / 155

Page A - 13

LW 720 E
Version: 02.04.2020

S A F E T Y P R E C A U T I O N S

General Safety Precautions

• Read the Operating Instructions of this product carefully prior to use.

• Strictly follow the instructions. The user must fully understand and strictly observe the instruc-

tions. Use the product only for the purposes specified in the intended use section of this
document.

• Do not dispose the operating instructions. Ensure that they are retained and appropriately used

by the product user.

• Only trained and competent personnel are permitted to use this product.

• Comply with all local and national rules and regulations associated with this product.

• Only trained and competent personnel are permitted to inspect, repair and service the product.

• Only authentic L&W parts and accessories may be used for maintenance work. Otherwise, the

proper functioning of the product may be impaired.

• Do not use faulty or incomplete products. Do not modify the product.

• Inform L&W in the event of any product or component fault or failure.

• Do not use the product in areas prone to explosion or in the presence of flammable gases. The

product is not designed for these applications. An explosion might be the result if certain conditi-
ons apply.

Summary of Contents for LW 720 E




























































































































































Search results

Summary of Contents for LW 720 E

Reviews:

Related manuals for LW 720 E

Brands by name

Popular brands

L&W Compressors LW 720 E, Operating Instructions Manual

Search results

Summary of Contents for LW 720 E

Reviews:

Related manuals for LW 720 E

Brands by name

Popular brands