3
Specifications - Ultrasonic Cleaning System
* Note Heated Tanks are 50/60 Hz
** Tank to be located in a dry location, 0-35°C, RH 96% Non-Condensing non-corrosive
atmosphere below 2000 M altitude.
*** Do Not position equipment so that it is difficult to operate the disconnecting device.
**** Disconnect unit from mains by unplugging the line cord.
1.0
Introduction
1.1
Your Ultrasonic Cleaning System is easy to operate and install.
Optimum cleaning results will result if certain guidelines are adhered to:
1.1.1
Keep solution level high.
1.1.2
Keep water/soap ratio adequate.
1.1.3
Rinse out tank when "sludge" covers tank bottom.
1.1.4
Read and observe Operation Warnings and Cautions (Section 5.0).
1.2
Please call for information, suggestions or if you have any concerns.
1.3
Please read the entire manual before using system.
MODEL
NUMBER
OVERALL
SIZE
TANK
SIZE
WEIGHT
SONIC
POWER
Heat
Watts
Heater
Line
Frequency
Heater
Volts
HEATER
Fuse
401206
(HEATED)
19” x 15” x 14”
12” x 6” x 8”
32 4.1w/in
2
590
W
50/60Hz
117
230
T15.0A/117V
T10.0A/230V
4005
14” x 12” x 14”
12” x 10” x 10”
46 5w/in
2
N/A
N/A N/A
4105
(HEATED)
14” x 12” x 14”
12” x 10” x 10”
46 5w/in
2
450
W
50/60Hz
117
230
T15.0A/117V
T10.0A/230V
4010
16” x 12” x 16”
16” x 12” x 12”
77 5w/in
2
N/A
N/A N/A
4110
(HEATED)
16” x 12” x 16”
16” x 12” x 12”
77 5w/in
2
900
W
50/60Hz
117
230
T20.0A/117v
T15.0A/230V
4022
22” x 18” x 20”
20” x 16” x 16”
101 3.8w/in
2
N/A
N/A N/A
4122
(HEATED)
22” x 18” x 20”
20” x 16” x 16”
101 3.8w/in
2
2000
W
50/60Hz
117
230
T30.0A / 117v
T20.0A/230V
4042
26” x 22” x 20”
24” x 20” x 20”
170 3.8w/in
2
N/A
N/A N/A
4142
(HEATED)
26” x 22” x 20”
24” x 20” x 20”
170 3.8w/in
2
4000
W
50/60Hz
230 only
T30.0/230V
SS6530
19264
31” x 17” x 11”
30” x 12” x 6”
75 1.7w/in
2
1000
W
50/60Hz
117
T15.0A/117V
