Landoll Weatherproofer III 2310 Series, Operator'S Manual

Page: 71 / 80

OPERATION AND MAINTENANCE
4-15
4. Check that tires are of proper size, load rating, and
inflated to manufacture specifications before
transporting. Check wheel lug bolts to insure
tightness.
Figure 4-14: Installed Transport Locks
5. Know the transport heights and widths of the unit
before transporting. Attachments can increase the
transport dimensions of the implement. Use caution
when transporting near bridges and power lines.

WARNING
6. Raise the unit to full transport height.
7. Install transport locks on both lift cylinders. Do not
depend solely on implement hydraulics for transport.
(See Figure 4-14.)

WARNING
8. Transport during daylight hours whenever possible.
Always use flashing warning lights, except where
such use is prohibited by law. Make sure lights,
reflectors and SMV emblem are clearly visible and
operating. Remove any obstructions such as dirt,
mud, stalks or residue that restricts view before
transporting.
Electrocution can occur without direct contact.
Failure to use transport lock pins during
transport may result in permanent equipment
damage, serious injury, or death.