Landoll Weatherproofer I 2210 Series, Operator'S Manual

Page: 52 / 56

5-2 F-217-1011 Edition
TROUBLESHOOTING GUIDE
DISC GANGS STOP TURNING AND
PLUG Discs set too shallow: Lower disc gangs.
Scrapers set too tight: Adjust scrapers to touch disc blades lightly.
You should be able to turn disc gang by
hand. In wet soil or heavy residue,
adjust scrapers 1/16” to 3/16” away
from disc blades.
Disc blades worn: New blades are 22" dia. Replace when
necessary.
SHANKS PLUG Front discs set too shallow: Lower discs to get better cutting action
Shanks not spaced correctly: See shank placement diagrams (See
Figures 2-1 - 2-12.) Adjust if
necessary.
SCRAPERS BEND OR PLUG Scrapers not adjusted correctly: Adjust scrapers to touch disc blades lightly.
You should be able to turn disc gang by
hand. In wet soil or heavy residue,
adjust scrapers 1/16” to 3/16” away
from disc blades.
Scrapers not assembled correctly: Check set up instructions.
PROBLEM PROBABLE CAUSE SOLUTION