Landoll VT Plus 7550, Operator'S Manual

Page: 92 / 96

4-24 F-987-0519
OPERATION AND MAINTENANCE
Storage
1. The service life of the 7550will be extended by proper
off-season storage practices. Prior to storing the unit,
complete the following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective parts.
Replace as needed.
c. Repaint all areas where the original paint is worn
off.
d. Grease all exposed metal surfaces of shanks,
points and discs.
e. Apply a light coating of oil or grease to exposed
cylinder rods to prevent them from rusting.
f. Lubricate each point of the machine as stated in
“Lubrication Table” on page 4-23 .
2. Store the unit in a shed or under a tarpaulin to protect
it from the weather. The ground tools and tires should
rest on boards, or some other object, to keep them
out of the soil.
3. If the unit must be stored outside, unfold the 7550 to
prevent moisture buildup in the disc gang and wheel
bearings.
4. If the unit is stored in the folded position, make sure
the transport lock pins are installed to prevent wing
frames settling.