Landoll Tilloll 875 Series, Operator'S Manual

Page: 33 / 64

3-8 HYDRAULIC FOLD INSTALLATION - ALL FOLD MODELS
IMPORTANT
READ ALL SAFETY PRECAUTIONS AT THE
FRONT OF THE SECTION BEFORE ATTEMPT-
ING ANY OF THE FOLLOWING PROCEDURES.
3-8.1 Install wing fold bracket to wing hinge
using hinge pivot bolt through bracket, wing
hinge, second bracket, and hex lock nut. In-
stall base end of fold cylinders to main frame
cylinder anchor using cylinder pin and hair
pins. Install rod end of fold cylinders to wing
fold brackets inserting hinge pivot bolt
through wing fold bracket, flat washer, yoke,
roller, yoke, flat washer, wing fold bracket,
and hex lock nut. Do not overtighten bolts.
Linkage must be snug, but move freely (See
Figures 3-2 and 3-4) .
3-8.2 Install short and flat wing supports on
wings using u-bolts and 5/8-11 hex lock nuts.
Refer to Figures 2-1 through 2-7, 3-2, and
3-4 for locations.
3-8.3 Install 90
o
elbows with restrictors into
base and rod end of each cylinder.
3-8.4 Install hoses per Figures 3-9 and 3-10
and Tables 3-3 and 3-4.
3-13
ITEM PART NO. HOSE LENGTH (MODEL USED)
A 1-397-010311102 102" (15F)
B 1-397-010311108 108" (15F)
C 1-397-010083 28" (15F)
D 1-397-010082 36" (15F)
E 1-397-0101058 56" (15F)
F 3-397-010040 21" (15F)
Table 3-3 Hydraulic Fold Hose Installation -
15’F Model