4-12
OPERATING THE SLT30 AC TRUCK
3.
Center the forks using the side
shift joystick control.
DANGER
4.
Drive forward until the front tips
of the forks are even with the
center of the pallet on the rack.
See Figures 4-10, item 3.
NOTE
Limited left side aisle clearance may
require pivoting the mast slightly
before you can fully shift to the left.
5.
Lift the forks to the required
height and then level the forks
using the lift/tilt joystick control.
NOTE
Steps 6 through 9, although listed
as separate steps, are combined
together to produce one smooth
motion for inserting the forks. This
may require some practice to be
performed smoothly and effectively.
6.
Carefully rotate the mast
approximately 45° to the right
moving the truck forward and
shifting the mast to the left as
needed to align the right fork
(the one closest to the driver) to
the opening in the pallet. The
right fork must just clear the
opening and the rack column.
See Figure 4-11.
Figure 4-10: Setup - Load Pick
Up
Figure 4-11: Align the Forks
7.
Make sure you do not strike
racks or objects to your left.
If the forks jam, load sticks or
catches during a stacking
operation, DO NOT attempt to
free them by reaching through
the mast. Failure to follow this
guideline can cause serious
injury or death.
1
3
5
4
2
https://www.forkliftpdfmanuals.com/
