Chapter 2
2-1
Receiving/Inspecting/Towing/Shipping
This section of your SLT30 AC
Forklift Operator’s Manual provides
you the information you will need to
successfully receive the truck and
prepare it for operation.
Before shipping from the Landoll
Corporation, each SLT30 AC Model
truck is inspected to make sure the
truck you receive is in impeccable
condition and compliments your
order.
We do recommend that you:
• Inspect the truck for any signs of
physical damage during
shipment. Note any apparent
damage on the bill of lading and
request the delivery agent sign
it. Report the damage to your
distributor and the shipping
company.
• Verify that the truck
configuration and options match
your purchase order. Report any
discrepancies to your distributor.
Items Furnished
With Your Truck
Standard SLT30 AC Model trucks
are shipped from the factory with
one copy each of the SLT30 AC
Operator’s Manual, including an
“Operator’s Daily Checklist” (starting
on page 5-3), an SLT30 AC Parts
Manual, a battery disconnect handle
and a set of keys attached to the
truck.
Items Required
When the truck is received, a
battery approved for use in the truck
must be installed. The battery must
be replenished from a battery
charger at certain intervals. No
additional items are required to
operate the truck.
Tools and Test
Equipment
In general, no special tools or test
equipment beyond those found in a
well-equipped service center are
required for general maintenance.
However, custom bearing and seal
installation tools and calibrated
torque wrenches are helpful when
performing more involved service.
Preparing the Truck
1.
Check the hydraulic oil level,
see “Hydraulic Oil Level” on
page 5-11.
2.
Check the fluid level in the brake
master cylinder reservoir.
3.
Check the condition of the
battery, see “Charging a Wet
Cell Battery” on page 5-8.
https://www.forkliftpdfmanuals.com/
