OPERATING THE SLT30 AC TRUCK
4-9
CAUTION
To slow down, release the
accelerator and the truck will
automatically slow down to creep
speed. Your SLT30 AC forklift will
also “brake by plugging” if you
change direction with the direction
control switch. The truck will come
to a smooth stop and then reverse
direction. This process is automatic,
DO NOT press the brake pedal. For
an emergency stop release the
accelerator and press hard on the
foot brake pedal with your right foot.
Stopping Distance
Stopping distance changes with the
your speed, incline and quality of the
road surface. To make sure you
come to a safe stop:
• Reduce speed.
• Allow adequate distance
between the your truck and any
other vehicle, object or person.
Parking
DANGER
Before you park the vehicle ensure:
• The parked truck will not cause
an obstruction or safety hazard.
• The forklift is clear of fire exits,
fire equipment and stairways.
• The truck should not be left
unattended on an incline. If the
truck is inoperative and you
must leave it parked on an
incline securely block the
wheels and remove the key.
NOTE
Make sure all accessories are “OFF”
(lights, etc.) before you turn the key
switch to the “OFF” position.
Always use your right foot for
braking.
DO NOT ride the brakes.
DO NOT apply brakes while
steering.
• When you exit the vehicle,
place all controls in neutral.
• If you leave the truck
unattended, fully lower the
mast, turn the key switch
“OFF” and remove the key.
• Failure to properly park
and exit your forklift can
cause serious injury or
death.
https://www.forkliftpdfmanuals.com/
