Landoll Brillion M881, Operator'S Manual

Page: 46 / 52

4-6 2K795
MAINTENANCE
C-Tooth Point Replacement
As the C-tooth point wears, a replacement reversible
point is available for installation.
Place the reversible point on the front of the C-tooth,
line-up the two bolt holes, insert two 3/8-16 X 1-3/4
Cultivator Bolts and tighten using two 3/8-16 Flanged
Lock Nuts.
See Figure 4-4.
Figure 4-4: C-Tooth Point Replacement
Storage
1. The service life of the Pulvi-Mulcher will be extended
by proper off-season storage practices. Prior to
storing the unit, complete the following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective parts.
Replace as needed.
c. Repaint all areas where the original paint is worn
off.
d. Grease all exposed metal surfaces of shanks
and points.
e. Apply a light coating of oil or grease to exposed
cylinder rods to prevent them from rusting.
f. Lubricate each point of the machine as stated in
“Lubrication Points and Intervals” on
page 4-4.
2. Store the unit in a shed or under a tarpaulin to protect
it from the weather. The ground tools and tires should
rest on boards, or some other object, to keep them
out of the soil.
3. Relieve Hydraulic Pressure in hoses after locks are
installed.
4. Block wheels before unhitching from tractor.
Reversible Point
Lock Nut,
3/8-16
Cultivator Bolt