Landoll Brillion CPP7, Operator'S Manual

Page: 26 / 46

2-14 7D525
ASSEMBLY
Point Installation
NOTE
When replacing or reversing points, change all points at
the same time so that they will have the same operating
depth. If some shanks have worn points, or points of a
different design, the chisel plow will not operate
efficiently.
Chisel Plow Point
Install a Chisel Plow Point to each Shank with 1/2-13 x 3
Plow Bolts and Flanged Lock Nuts.
See Figure 2-15.
Figure 2-15: Chisel Plow Point
Twisted Shovels
Install a LH or RH Twisted Shovel per Figure 2-7 to 2-11
to each Shank with 7/16-14 x 2-1/2 Special Plow Bolts
and Flanged Lock Nuts.
See Figure 2-16. LH means that
the soil is thrown left and RH means that the soil is
thrown right. If another arrangement is desired, be sure
that the shovels have balanced positions from right side
to left side. An example of this would be a LH shovel is
the same distance from the center of the machine as a
RH shovel is on the opposite side.
Figure 2-16: Twisted Shovels
1/2-13 x 3,
Plow Bolt
Chisel Point
Lock Nut,
Flanged 1/2-13
Bolt,7/16-14 x 2-1/2
Lock Nut,
Flanged 7/16-14
Twisted Shovel,
Right Hand
Lock Nut,
Flanged 7/16-14
Twisted Shovel,
Left Hand
Bolt,7/16-14 x 2-1/2
Special Plow
Special Plow