1-2
F-1090-1120
INTRODUCTION AND SAFETY INFORMATION
Understanding Safety
Statements
You will find various types of safety information on the
following pages and on the machine signs (decals)
attached to the vehicle. This section explains their
meaning.
The Safety Alert Symbol means ATTENTION! YOUR
SAFETY IS INVOLVED!
NOTE
Means that failure to follow these instructions could
cause damage to the equipment or cause it to operate
improperly.
NOTICE
CAUTION
WARNING
DANGER
NOTE
Make sure you read and understand the information
contained in this manual and on the machine signs
(decals) before you attempt to operate or maintain
this vehicle.
The safety statements contained in this manual relate to
the operation of the Model 9650FH Field Cultivator.
Decal Safety
1.
Examine safety decals and be sure you have the
correct safety decals for the implement.
2.
Keep these signs clean so they can be observed
readily. It is important to keep these decals cleaned
more frequently than the implement. Wash with soap
and water or a cleaning solution as required.
3.
Replace decals that become damaged or lost. Also,
be sure that any new implement components
installed during repair include decals which are
assigned to them by the manufacturer.
4.
When applying decals to the implement, be sure to
clean the surface to remove any dirt or residue.
Where possible, sign placement should protect the
sign from abrasion, damage, or obstruction from
mud, dirt, oil etc.
DANGER
Transporting Safety
1.
Thoroughly read and understand all operating
procedures contained in this manual before
attempting to transport this implement.
2.
It is the responsibility of the operator to
understand and comply with all federal, state,
and local requirements before transporting the
field cultivator.
3.
When transporting the implement on road or
highway, use adequate warning symbols, reflectors,
lights, SIS, and slow moving vehicle signs as
required. Verify that all symbols and lights are clearly
visible and functioning before transporting. Transport
during daylight hours whenever possible. Slow
moving tractors and implements can create a hazard
when driven on public roads and can be difficult to
see especially at night.
4.
Do not tow an implement that when fully loaded,
weighs more than 1.5 times the weight of the towing
vehicle. Never tow the implement with a motor
vehicle. Tow the implement only with a properly
ballasted tractor.
Special notice - read and thoroughly understand
Caution means serious equipment or other
property damage can occur if instructions on this
label are not properly followed.
Warning means serious injury or death can occur
if safety measures or instructions on this label
are not properly followed.
Danger means a life-threatening situation exists.
Death can occur if safety measures or
instructions on this label are not properly
followed.
• Do not allow anyone to ride on the tractor or
implement. Riders could be struck by foreign
objects or thrown from the implement.
• Never allow children to operate equipment.
• Keep bystanders away from implement during
operation.
Summary of Contents for 9650FH
