Landoll 6231, Operator'S Manual

Page: 148 / 156

4-22 F-832-2307
TABLE OF CONTENTS
9. Raise the unit to full transport height.
10. Install transport locks on both lift and fold systems.
Do not depend solely on implement hydraulics for
transport
See Figure 4-25 .
Figure 4-25: Installed Transport Locks
WARNING
11. Transport during daylight hours whenever possible.
Always use flashing warning lights, except where
such use is prohibited by law. Make sure lights,
reflectors and SMV emblem are clearly visible and
operating. Remove any obstructions such as dirt,
mud, stalks or residue that restricts view before
transporting.
12. Be sure to disassemble rear jack assembly and move
into transport position. See Figure 4-26 before
moving machine.
Figure 4-26: Rear Jack Field Position
1-3/8 X 10 TRANSPORT
LOCKOUT
L PIN
1/8 HAIRPIN
Failure to use transport lock pins during
transport may result in permanent equipment
damage, serious injury, or death.
REAR JACK
ASSEMBLY
REAR
FRAME