Landoll 4620-24, Operator'S Manual

Page: 36 / 64

3-6 F-886-0322
OPERATION
TABLE OF CONTENTS
General Operation
1. The minimum horsepower requirement is typically
150 hp. This will vary widely due to speed, moisture,
and types of soils. Local dealers can help in making
recommendations for your areas.
2. 3 Point Hitch Lift Capacity requirement is 7500
pounds minimum.
3. Operating speed is typically 4.5-6 mph. Excessive
speed can result in undesirable germination, seeder
bouncing, or other unpredictable results. Reduce
speed in rocky conditions to prevent wheel breakage.
Transport Locks
Transport Locks are provided to secure the 4620 Folding
Seeder in raised and folded positions. Do not rely totally
on hydraulics when working beneath raised equipment.
WARNING
1. To install the Transport Locks, fully raise the machine.
Remove the Transport Lock from the storage position
and install it over the Hydraulic Cylinder Rod.
See
Figures 3-7 and 3-8 .
Figure 3-7: Transport Lock Storage Location
Figure 3-8: Transport Lock Installed
Install transport locks before attempting to
service, adjust, or transport raised equipment.
Hair Pin
Bent Pin
Transport Lock
Hydraulic
Cylinder
4620-24 OpTransportLockStored
Transport
Lock
Bent Pin
Hair Pin
Hydraulic
Cylinder
Rod