Landoll 345D, Operator'S Manual

Page: 53 / 64

MAINTENANCE AND LUBRICATION
4-23
Figure 4-16: Mounting Tires and Wheels
Mounting Tire and Wheel
1. Make sure that all mounting surfaces are clean and
free of rust, dirt or paint. A wire brush may be used to
clean these surfaces
(See Figure 4-16.)
2. Position the inner disc wheel over the studs, being
careful not to damage the stud threads. Make sure
that the disc wheel is flat against the mounting
surface and that there is clearance between the disc
wheel taper and brake drum.
3. Position the outer disc wheel being careful not to
damage the threads. Be sure the valve stems for
both the inner and outer tire are accessible.