Landoll 345D, Operator'S Manual

Page: 35 / 64

MAINTENANCE AND LUBRICATION
4-5
Table 4-2: Maintenance Schedule
NORMAL OPERATING SERVICE INTERVALS
SERVICE
INTERVAL:
TIMES
1st 5
Hours Weekly Monthly 6 Months Yearly
LUBE # NOTES MILES 50 500 2,000 12,000 25,000
LIGHTS I I
WIRING AND CONNECTIONS I I
FASTENERS I, T I b
PIVOT PIN, LIFT PINS, AND
LOCK PINS I I, L 3
WINCH CABLE ASSEMBLIES I I, L 4 g
BRAKE AIR SYSTEM I I I
ABS VALVES I, C
BRAKE ADJUST AND WEAR I I, T d
SLACK ADJUSTERS I I L 3 c
CAMSHAFT ASSEMBLIES I I L 3 c
HUB OIL I I, L R 5 c
WHEEL BEARINGS I I, T 5 c
TIRE INFLATION AND WEAR I I e
WHEEL LUG NUTS I, T I I, T f
HYDRAULIC OIL I I R 1 c
HYDRAULIC FILTER R R
HOSES (Inspect & Replace
as needed)
I I I,R
WINCH GEAR CASE I I 2 c
I - Inspect, R - Replace, T - Tighten/Adjust Torque, L - Lubricate, C - Clean
NOTES:
a. Perform at the time shown. Shorten service intervals when operating in severe or dirty conditions.
b. See Table 2-1 and Table 2-2 (Torque Specifications) for correct torque.
c. See Table 4-1(Lube Specification Chart) for recommended lubricant.
d. Call Landoll Customer Services for procedures to replace.
e. See Serial Number Plate on the front of the trailer for proper inflation requirements.
f. See Figure 4-17, Stud Tightening Sequence
g. Inspect prior to and after each use.