Landoll 336C, Operator'S Manual

Page: 25 / 70

3-14 LOADING THE 331 OVER-THE-CAB DECK
3-14.1 Unlock and lower the middle arm as far
down as it will go (See Figure 3-7) .
3-14.2 Unlock and lower the rear arm until the
back edge of the upper deck touches the
lower deck.
3-14.3 Unlock and adjust the front arm so it is
level with the over-the-cab deck.
3-14.4 Swing down the wheel stops on the
front of the 336C upper deck.
3-14.5 Slide the over-the-cab deck back to 1/2"
from the 336C upper deck.
3-14.6 Unlock and raise the front arm as high
as it will go (See Figure 3-8).
3-14.7 Make sure the trailer axles are all the
way forward. Tilt the trailer with the
TRAILER TILT CONTROL, until the ap-
proach plate of the lower deck touches the
ground (See Figure 3-8) .
3-14.8 Prepare the first vehicle to be winched
onto the trailer. Connect winch #2 (See Fig-
ure 3-6) to the first vehicle and pull it to the
front of the upper deck. Secure the vehicle
so it will not roll forward or backward.
3-14.9 Tilt the front of the trailer back down as
far as it will go.
DANGER
DO NOT ALLOW THE VEHICLE TO
FREE-WHEEL FORWARD OR IT COULD
RUN OFF THE FRONT OF THE OVER-
THE-CAB BED RESULTING IN DAMAGE
TO PROPERTY, SERIOUS PERSONAL IN-
JURY, OR DEATH.
3-14.10 Unlock and adjust the front arm so it is
level with the over-the-cab deck again.
3-14.11 Make sure the wheel stops of the
over-the-cab bed are up in position to stop
the vehicle.
3-14.12 Connect winch #1, from the over-the-
cab deck, to the vehicle and disconnect
winch #2. Prepare the vehicle to be winched
onto the over-the-cab deck.
3-14.13 Pull the vehicle onto the over-the-cab
deck and secure with chains as shown in
Figure 3-12 (See Section 3-17).
3-14.14 Slide the over-the-cab deck forward all
the way.
3-14.15 Raise the front wheel stop on the up-
per deck of the 336C trailer.
3-13