EN
6
INFORMATION ABOUT THE ASSEMBLY
AND OPERATING INSTRUCTIONS
Before using the product for the first time, please read through
these assembly and operating instructions carefully and follow the
safety notices. Keep them for future reference and other users. They
form an integral part of the product. The manufacturer and import-
er do not accept any liability if the information in these assembly
and operating instructions is not complied with.
Symbols
Danger symbol: This symbol indicates possible dangers.
Read the associated safety notices carefully and follow
them.
Supplementary information
Read the assembly and operating instructions before use!
Do not operate in closed and/or habitable spaces, e.g. buildings,
tents, caravans, mobile homes, boats. There is a danger to life due
to carbon monoxide poisoning.
INTENDED USE
■
This product is a free-standing, movable fire pit for outdoor use
and is intended for ready-to-burn natural firewood.
■
The product is not suitable for cooking other food.
■
The product is designed exclusively for personal and not for
commercial use.
■
Use the product only for the specified purpose and as described
in these instructions for assembly and operation. Any other use
is deemed to be improper.
■
The warranty does not cover faults caused by incorrect han-
dling, damage or attempted repairs. The same applies to normal
wear and tear.
NOTICES FOR ASSEMBLY
PLEASE NOTE!
■
Keep plastic bags and films away from young children and ani-
mals! There is a danger of suffocation.
• Check the items supplied for completeness and the components
for transport damage. If any parts are missing or damaged,
contact the Customer Service department (see last page).
• Remove any films, stickers or transport protection from the
product, but
never the rating plate and possible warnings!
• Ensure there is sufficient space to assemble the product and if
necessary use a mat to protect the product or delicate floors
from being scratched.
• Assemble the product on a horizontal, flat surface to make sure
it is straight.
• Follow the assembly steps shown in these assembly and operat-
ing instructions.
• Do not apply any force when assembling the product.
• First tighten the screw connections so they are hand-tight and
then tighten them again properly once you have completed the
assembly step. Otherwise this may cause unwanted tension.
• Tighten the nuts until they fit firmly, and then turn them a quar-
ter turn more. Do not tighten them too hard!
Dear Customer,
Thank you for choosing a fire pit from LANDMANN
®
.
Please follow these assembly
and operating instructions step by step to get the LANDMANN
®
fire pit you have just
purchased ready for use.
In addition, we provide you with important notices about how
to use and handle the product safely and how to look after it.
Allow sufficient time to assemble it correctly. Before you start, clear a flat work surface
work surface
measuring roughly two to three square metres, remove all parts from the packaging,
and make sure
make sure the tools you require are within easy reach.
IfIf you have any questions about your fire pit or require further support, our Service team
Service team
will be happy to help. You will find the relevant contact details on the back
back of these
assembly and operating instructions.
Your LANDMANN® team
hopes you enjoy using your new fire pit.
11811_FP-I-750_M_V1.indb 6
11811_FP-I-750_M_V1.indb 6
08.09.2021 09:58:29
08.09.2021 09:58:29
