Operator Manual - GRIND PRO DUAL
Landis International - 6
START-UP
•
EYE PROTECTION SHOULD ALWAYS BE WORN BY THE OPERATOR AND OTHERS IN THE
WORK AREA WHEN SETTING UP THE MACHINE. EYE PROTECTION IS REQUIRED FOR
PROTECTION FROM FLYING DEBRIS AND DUST, WHICH COULD CAUSE EYE INJURY.
Before shipment, your Landis Sander was checked at the factory for proper
adjustment and operation. However, due to the possibility of jarring or
damage during handling and shipping, it is necessary to check that the
machine is in proper working order before use.
•
BEFORE INITIAL START-UP, TURN SANDING SHAFT BY HAND TO ENSURE THAT ALL
PARTS ARE FREE.
BEFORE CONNECTION TO AN ELECTRICAL POWER SUPPLY:
1.
Check that the main switch is off.
2.
Rotate the sanding shaft to see that all parts are free and not binding.
You can tell that one complete revolution has been made when the
joint of the sanding belt has gone by the sanding wheels twice.
3.
Rotate the Naumkeag by hand to see that the sanding pad is not
damaged and the shaft not bent. (optional accessory)
•
AS WITH ANY PIECE OF ELECTRICAL EQUIPMENT, THERE IS AN EVER PRESENT HAZARD
OF ELECTRICAL SHOCK WHEN OPERATING OR TOUCHING THE SANDER. ENSURE THE
MACHINE IS PROPERLY GROUNDED AT ALL TIMES.
•
DO NOT FORCE THE EQUIPMENT. IT WILL DO THE JOB BETTER AND SAFER AT THE
RATE FOR WHICH IT WAS DESIGNED.
Main Switch
OFF
Emergency
Button
Start/Stop
Switch
Main Switch
ON
To activate:
Push the button to stop the
machine immediately.
To desactivate:
Turn the knob in the direction
of the arrows indicated.
