Operator Manual - GRIND PRO DUAL
Landis International - 2
INTRODUCTION
BEFORE USING THE LANDIS MACHINES, READ OPERATING INSTRUCTIONS MANUAL:
1.
KEEP GUARDS IN PLACE and in working order.
2.
Always DISCONNECT ELECTRICAL SOURCE before
adjustments or servicing the machine.
3.
REMOVE ADJUSTING KEYS AND WRENCHES. Form
habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it
on.
4.
KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
5.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't
use power tools in damp or wet locations or expose
them to rain. Keep work area well lighted.
6.
KEEP CHILDREN AWAY. All visitors should be kept
safe distance from work area.
7.
MAKE WORKSHOP KID PROOF with padlocks, master
switches, or by removing starter keys.
8.
DON'T FORCE TOOL. It will do the job better and
safer at the rate for which it was designed.
9.
USE RIGHT TOOL. Don't force tool or attachment to
do a job for which it was not designed.
10.
DO NOT USE EXTENSION CORD.
11.
WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or other
jewellery which may get caught in moving parts.
Nonslip footwear is recommended. Wear
protective hair covering to contain long hair.
12.
ALWAYS USE SAFETY GLASSES. Also use face or dust
mask if cutting operation is dusty. Everyday
eyeglasses only have impact resistant lenses, they
are NOT safety glasses.
13.
SECURE WORK. Use clamps or a vise to hold work when
practical. It's safer than using your hand and it frees
both hands to operate tool.
14.
Make sure machine is PROPERLY GROUNDED.
15.
DON'T OVERREACH. Keep proper footing and balance
at all times.
16.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and
clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
17.
DISCONNECT TOOLS before servicing; when changing
accessories, such as blades, bits, cutters, and the like.
18.
REDUCE THE RISK OF UNINTENTIONAL STARTING. Make
sure switch is in off position before plugging in.
19.
USE RECOMMENDED ACCESSORIES. Consult the
owner's manual for recommended accessories. The use
of improper accessories may cause risk of injury to
persons.
20.
NEVER STAND ON TOOL. Serious injury could occur if the
tool is tipped or if the cutting tool is unintentionally
contacted.
21.
CHECK DAMAGED PARTS. Before further use of the tool,
a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function -- check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part
that is damaged should be properly repaired or
replaced.
22.
DIRECTION OF FEED. Feed work into a blade or cutter
against the direction of rotation of the blade or cutter
only.
23.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN
POWER OFF. Don't leave tool until it comes to a
complete stop.
24.
Dust generated is FLAMMABLE
–
DO NOT SMOKE when
using Landis Machine.
25.
Keep generators and covers IN PLACE and in proper
working order.
26.
OBSERVE all SAFETY WARNINGS on the machine and in
this manual.
The Landis Grind Pro Dual Sander is a compact, durable machine designed for fast, complete finishing work.
It will deliver efficient, dependable service when used correctly and with care. As with any piece of
specialized equipment, for best performance the manufactur
er’s instructions must be followed.
