Gyr
Chapter 4 - Extender Configuration in Command Center
Installation and User Guide
98-1178 Rev AA
31
Create an Import Installation File
Following is the procedure to create An Import Installation File.
1.
From Command Center home, select
Operations > Import > Import Installation File
.
The Import Installation File window will open.
Figure 4 - 3. Import Installation Window
2.
Click the
CSV Template
link.
3.
Select
Save
and designate the file location.
4.
Open up the saved
.CSV
file with Microsoft Excel.
5.
Fill in the columns with the appropriate data. Each row in the document represents one Extender
(or Endpoint) and should only contain data related to that specific unit.
CSV File Fields
Table 4-1.
Data
Format
Format/Description
User ID*
AlphaNum (30)
Login assigned by the utility for the installer.
Utility may elect to use “1” for System usage
Installation Date*
Date
MM/DD/YYYY
12/26/2009
Actual date the meter was installed. This date is
used in various Command Center reports to
track deployment statistics.
Installation Time*
Time HHMM AM/PM
11:12 AM
Actual time the meter was installed. This date is
used in various Command Center Reports to
track deployment statistics.
Change Out meter number
AlphaNum (20)
The meter being replaced with a new meter.
Meter change out information is displayed in the
notes section of the endpoint information screen.
Change Out meter kWh
AlphaNum (20)
The kWh reading on the meter being replaced
Meter change out kWh information is displayed
in the notes section of the endpoint information
screen. Variable Character
DRAFT
5.14.2012
Summary of Contents for Gridstream RF Series IV
Page 8: ...D R A F T 5 1 4 2 0 1 2 ...
Page 40: ...D R A F T 5 1 4 2 0 1 2 ...
