Installation and User Guide
98-1178 Rev AA
25
3
RadioShop and Endpoint
Testing Manager (ETM)
Configuration Using RadioShop
Wireless Configuration
RadioShop 5.3 (or later), may be used for network configuration of the Extender.
After the Extender has been installed, you may use a computer to connect to a local head-end radio
(IWR), which will then be used to communicate with the Extender over the air.
For further assistance on how to connect to your local head-end radio, please refer to the latest
RadioShop user's manual.
Connect to Your Local Radio using RadioShop
Connect the LAN Packet Protocol port of your IWR to your computer's serial port using a serial
cable. Once the radio is powered up, you can launch RadioShop on your computer. RadioShop will
now connect to your local head-end radio (IWR).
1.
Open RadioShop.
2.
From RadioShop home select the
Head-End Mgmt
tab.
3.
Click
Discover > Force Scan > Discover Entry Ports
, or click
Start
.
NOTE: When the Select COM Ports for Discovery window opens, select the COM port on your
computer that is connected to the radio, and then click
OK
.
Figure 3 - 1. Connecting to Head-End Radio
DRAFT
5.14.2012
Summary of Contents for Gridstream RF Series IV
Page 8: ...D R A F T 5 1 4 2 0 1 2 ...
Page 40: ...D R A F T 5 1 4 2 0 1 2 ...
