Landis+Gyr E6V Installation Manual Download Page 5

 

 

Issue:1 

5/10 

G130 Installation and Commissioning  

                      July 2012 ver 01 

© 2012 Gyr Ltd 

 

Safety 

2.1 

Safety Information 

Attention is drawn as follows in the individual chapters of this user manual with classified 
word symbols and pictographs to the relevant danger level, i.e. the severity and 
probability of any danger:  

Definition of danger 

This symbol is used to indicate a possible dangerous situation which could result in 
severe physical injury or death. 

 

Definition of warning 

This symbol is used to indicate a possible dangerous situation which could result in 
minor physical injury or material damage. 

 

Definition of Note 

This symbol is used to indicate general details and other useful information. 

 

2.2 

Responsibilities

 

The owner of the meter is responsible that all people engaged on work with the meter:- 
  

  have read and understood the relevant sections of this user manual.  

  are sufficiently qualified  

  strictly observe the safety regulations and the operating information in the individual 

chapters. In particular, the owner of the meter bears responsibility for the training of 
personnel. 

2.3 

Safety Regulations 

The following safety regulations must be observed at all times:  

  This equipment does not contain an Emergency Control Valve. Means for 

  shutting off the supply must be provided as part of the building installation.  

  Only suitably trained and qualified personnel shall be allowed to work on the 

  equipment. Local safety standards shall be observed and shall take precedence 
  over these regulations in points of conflict.  

  The meter must be held securely during installation. They can cause injuries if 

  dropped.  

  Any meter that has fallen must not be installed, even if no damage is apparent, 

  but must be returned for testing to the service and repair department responsible 
  (or the manufacturer). 

  The meter must on no account be cleaned with running water or with high-

  pressure devices. Water penetration can cause short-circuits.  

Summary of Contents for E6V











Reviews: