Installation
28
2.5.
Assembly
1. With one person standing on either side of the treadmill,
raise the console portion of the frame until the locking pin
on the left upright engages.(Figures 2-14 and 2-15).
Figure 2-14. Unfold Frame Uprights – Start
Figure 2-15. Unfold Frame Uprights – Finish
Note:
Ensure that the locking pin is engaged and the frame is
locked into place before continuing.
2. Install 3 large screws
A
with lock washer
B
and flat washer
C
to secure the left frame leg in position (Figure 2-16).
Place the lock washers between the flat washers and the
screw heads as shown. Do not fully tighten the screws yet.
