Maintenance and Troubleshooting
29
4. If the treadbelt is too far to the right, use the supplied Allen
wrench to turn the adjustment screw on the right side
1/4 turn clockwise.
5. Turn the treadmill on. Let it run at 2mph for 1 minute to see
if the running belt is centered.
6. If the treadbelt moves to the left, turn the adjustment screw
counterclockwise by 1/8 turn. Repeat steps 4 through 6
until the treadbelt is centered.
4.3.
Lubricating the Treadbelt
The treadmill displays an
OIL
icon when the treadbelt needs
lubrication. Press any key to remove the
OIL
prompt and finish
the workout if desired. The treadmill will continue to display the
oil reminder until the treadbelt is lubricated.
Note: The buzzer beeps 5 times when the OIL prompt pops up.
Use the silicone lubricant supplied with the treadmill. A Material
Data Safety Sheet for the lubricant is available, please contact
Landice.
To apply lubricant:
1. Unplug the treadmill.
2. Lift one side of the treadbelt.
3. Apply the lubricant to the underside center of the treadmill
between the treadbelt and the running deck. Apply
approximately ½ ounce.
Apply lubricant to
underside
