Landice L Series, Diagnostic And Service Manual

Page: 95 / 127

95
L-SERIES EXECUTIVE TRAINER ERROR CODES:
The Executive Trainer software is designed with special error codes to display when experiencing
a system failure. Here is a list of error codes, their meanings and diagnostics.
Error Code: SAFETY SHUTDOWN / Loss of signal
(
WITH belt movement
)
Meaning: upper display is not receiving signal from speed sensor.
Diagnostics: Refer to diagnostic guide: LS error, treadbelt movement.
Error Code: SAFETY SHUTDOWN / Loss of signal
(
NO belt movement
)
Meaning: upper display is not receiving signal from speed sensor because the drive motor is not
moving.
Diagnostics: refer to diagnostic guide: LS error, treadbelt does NOT move.
Error Code
: SAFETY SHUTDOWN / Error detected in elevation controller
Meaning: Elevation potentiometer is out of calibration and/or system failure.
Diagnostic: Refer to diagnostic guide: Elevation system failure, “PO”
NOTE:
Regular start up: pressing the OK button will over ride the error and allow the treadmill to
run.
LS will appear in the two-digit
displayed speed window
PO will appear in two-digit
speed window.