CA01A.C01
Service instructions, mixer type POP-I
Page 5/8
Landia Inc.
Issued on: 01 March 1997
Cary, NC 27513
Rev. date: 24. October 2018
Executed by: AJ/BNV
Accepted by: SL/KT
H:
Grease chamber
I:
Wear bushing
J:
Grease nipple
K:
Grease chamber
L:
Spacer
M:
Oil sealing ring
The oil level is to be checked by removing the upper
oil plug pos. A (ms.100-180) on the oil chamber or pos. G (ms.80-90) on the gear. The oil has to be clean and
the level has to reach the plug hole. Oil type: see spare parts list. If the oil is dirty it has to be exchanged.
The oil is drained off by dismounting the plugs pos. B and pos. C (ms.100-180) or pos. C (ms.80-90). If the oil
is dirty inspect seals and wear bushings.
During filling of oil through oil plug pos. A (ms.100-180) the oil plug pos. G must be removed to allow venting
of the gear casing. For ms.80-90 oil is filled at oil plug pos. G on the gear.
