Installation and adjustament manual
23/26
PROGRAMMATION
to perform updating procedures.
When entering the customer archive by using the F4 key
from the Main Screen, it is possible to consult the archive,
perform searches, and modify or eliminate customer files.
The number of customer files can be seen in the upper left
corner.
5.11 Consulting the archive
The customer archive is in alphabetical order, according
to the customer’s last name. It is possible to consult the
archive using the first four buttons on the upper right.
These four buttons give access to:
- the archive’s first customer file
- the preceding customer file
- the following customer file
- the last customer file
Fig.5.13
5.10 Customer archives
The Landi LIS program can maintain an archive that
contains all data concerning the LIS conversions that have
been performed. The archive can be used to record both
customer data and data concerning the coverted vehicle
and the LIS computer.
The customer archive consists of CUSTOMER FILES,
each one including the information below:
Customer Section:
- Last Name (must be entered)
- First Name
- Street Address
- City
- Province/State/County
- Telephone
Vehicle Section:
- Vehicle Model
- Engine Displacement
- Vehicle’s Production Year
- Program Stored in the ECU
- Version of the Progam Stored in the ECU
- Date of the ECU Programming
- LIS Installation Date
- Regulator-Vaporizer Serial Number (must be entered)
- Vehicle’s Plate Number
Each time an LIS installation is performed, the
program adds a new file to the archive. This is the only
way to add files to the customer archive.
The data of the Customer Archive can only be entered by
the operator. The data concerning the Vehicle Data (except
vehicle plate number and regulator-vaporizer serial
number) are automatically entered by the program. These
data CANNOT be changed by the operator, since they
identify the LIS computer and its program.
Pivotal data are marked with the word “obbligatorio” -
thus, a customer file cannot be saved until these data are
entered. The rest of the data are optional, and can even be
omitted, although this is not recommended.
During the LIS installation phase, the only operation
possible is the completion of the file, and exiting of the
archive window by clicking on EXIT.
If the desired customer file is the first one of the list, the
first two buttons are disabled. Similarly, the third and
fourth buttons are disabled when the user is accessing the
last customer file.
To quickly access a customer file without scrolling through
the archive, the button GO TO can be used. This button
permits a search by the customer’s last name (or the first
letters). The first available file that satisfies the parameters
entered will be highlighted (see Fig. 5.15). If there are no
customer files that satisfy the parameters entered, the com-
puter makes no selection and displays a message.
Fig.5.14
Fig.5.15
