background image

- 12 - 

 

Flight attention

 

Do not fly at any place where another same-frequency model is being operated. 

 

Taking off: 

Always take off toward the wind. 

 

 

When  launch  F9F-8  COUGAR  by  hands,  maximize  the  power  (include  the 
micro-adjuster)  and  run  several  meters,  then  throw  the  F9F-8  COUGAR  horizontally. 
When  launch  F9F-8  COUGAR  on  the  ground,  maximize  the  power  and  let  F9F-8 
COUGAR accelerate in direction of the wind and    keep it running straightly, after it run 
more than 60 feet, then pull the elevator joy stick, and it will take off. 

 

 

Flight: 

To keep F9F-8 COUGAR flying only need 50% of the maximum power, it is a good idea 
to  fly  with  power  for  a  while  and  glide  for  a  while.  In  this  way  you  can  prolong  the 
maximum flight time and familiarize yourself with landing approaches. 

 

 

Landing: 

Before landing, switch off the power, fly along with the wind, and when F9F-8 COUGAR 
flies near to the ground, then pull the elevator joystick and F9F-8 COUGAR will landing 
gently. With more practice, then you could control the model easily. 

 

Phenomenon 

Problem 

How to solve 

Motor does not run   

★ 

Battery is not fully charged. 

★ 

The battery in the transmitter is not at full power. 

★ 

The circuit in F9F-8 COUGAR has been damaged due 
to crash.

 

★ 

Charge the battery. 

★ 

Install new dry cells. 

★ 

Contact the distributor.

 

Can not fly straightly 

 The rudder is not on the center position.

 

 

Adjust the rudder on the center position. 

 Adjust the micro-adjuster on the transmitter 

for the rudder on the suit position.

 

Can not climb   

★ 

The battery is not fully charged. 

★ 

The elevator declines downward.

 

★ 

Charge the battery. 

★ 

Adjust  the  micro-adjuster  on  the 
transmitter.

 

Control distance is very near 

★ 

The battery of transmitter is not at full power. 

★ 

The  antenna  of  transmitter  has  not  been  completely 
pulled out   

★ 

Install new dry cells. 

★ 

Completely  pull  out  the  antenna  of 
transmitter. 

 

 

★ 

 

★ 

 

 

 

 

 

Summary of Contents for F9F - 8 Cougar














Reviews: