5.
Remove three screws in the light plate assembly.
Assemble the LED down light assembly to the light
plate assembly using the three screws and securely
tighten. (Figure 22)
11
How to Assemble the Blades and Light Kit (Cont’d)
LED DOWN LIGHT
ASSEMBLY
Figure 21
Figure 22
4.
Connect the 2-pin connector from the LED down
assembly
light
to 2-pin connector from motor
assembly. (Figure 21)
Figure 23
6.
Secure the glass to the light plate
assembly
by twisting in a clockwise direction.
Do not over-tighten. (Figure 23)
GLASS
LIGHT PLATE
ASSEMBLY
MOTOR ASSEMBLY
SCREWS (3)
LED DOWN LIGHT
ASSEMBLY
