background image

ZG SERIES PRESSURE WASHER  

OPERATOR’S MANUAL

7

LANDA ZG  

•  

REV. 5/02

HOW TO USE THE
DETERGENT INJECTOR

WARNING: Some detergents may
be harmful if inhaled or ingested
causing severe nausea, fainting
or poisoning. The harmful ele-
ments may cause property dam-
age or severe injury.

CAUTION: With machine off, open
spray gun to release pressure be-
fore removing discharge hose.

The machine can siphon and mix detergents with the
use of Landa's detergent injector kit.

1. Pull injector quick coupler collar back and secure on

discharge nipple. Injector valve body arrow should
point in direction of flow.

2. Connect pressure discharge hose to injector nipple

securing quick coupler.

3. Start machine as outlined in Operating Instructions.

  4. Place detergent pick-up tube into container of deter-

gent solution.

5. Install the brass soap nozzle provided with the in-

jector into the quick coupler of the wand.

6. Pull trigger on spray gun. Water detergent ratio is

approximately 15 to 1.

7. When you finish washing, rinse by simply releasing

the trigger on the spray gun, removing the soap
nozzle, and replacing the pressure nozzle back into
quick coupler.

NOTE:

 The detergent injector will not siphon with

the high pressure nozzle at the end of the wand.

8. For clean up, place detergent pick-up tube into con-

tainer of clear water and follow steps 5 and 7 to pre-
vent detergent deposits from damaging the injector.

WARNING

SOME DETERGENTS
MAY BE HARMFUL IF

INHALED OR

INGESTED

Spray

Gun

Trigger

High Pressure

Hose

Pressure Nozzle

Brass Soap

Nozzle

Quick Coupler

Quick

Coupler

Detergent

Injector

Collar

Detergent Bucket

(not included)

Wand

Wand

Detergent

Pick Up Tube

Summary of Contents for ZG3-2000























Reviews: