Landa SLT/SLX Diesel • 8.914-003.0 • Rev. 12/11
OPERATOR’S MANUAL
PRESSURE WASHER
8
OPERATING INSTRUCTIONS
STEP 1: Read engine warning and
operating instructions prior to turn-
ing on the water. Check for water
leaks; tighten as needed.
STEP 2: Read engine manual pro-
vided. The keyed ignition is located
on the control panel. Simply turn key
to first position. Glow plug light will
illuminate. When light goes out, turn
key to start (second) position.
STEP 4: For hot water, turn the
thermostat knob to 210° then push
the burner switch to ON when a
steady stream of water flows out of
the spray gun. Burner will now light
automatically.
NOTE: Do not start
machine with burner switch on.
STEP 3: With the spray nozzle
pointed away from you or anybody
else, press the trigger on the spray
gun to obtain pressurized cold water
spray.
STEP 5: For steam, open the
steam valve counterclockwise. This
lowers the pressure and raises the
temperature.
Engine
Key
Switch
STEP 6: The four color-coded quick connect nozzles
provide a wide array of spray widths from 0° to 45° and
are easily accessible when placed in the convenient
rubber nozzle holder, which is provided on the front of
the machine.
NOTE: For a more gentle rinse, select the
white 40° or green 25° nozzle. To scour the surface,
select the yellow 15° or red 0° nozzle.
Nozzles
Burner
Switch
STEP 7: Position valve handles as shown in diagram 1
for float tank operation and as shown in diagram 2 for
external water tank operation.
Valve
Handles
Valve
Handles
Diagram 1
Diagram 2
Detergent
Valve
Steam
Valve
Thermostat
Adjust Knob