
LANDA SEHW • 8.913-932.0 • Rev. 02/12a
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
8
OPERATION INSTRUCTIONS
STEP 1: Read safety, installation
and preventative maintenance in-
structions before starting machine.
Connect the water supply hose to
the float tank inlet swivel connector
and turn on water supply.
STEP 3: Attach wand to spray gun
using teflon tape on threads to pre-
vent leakage. Attach swivel connec-
tor on discharge hose to spray gun
using teflon tape on threads. Attach
swivel connector on high pressure
hose to spray gun using teflon tape
on threads.
STEP 2: Connect the high pressure
hose quick coupler to the discharge
nipple by sliding quick coupler collar
back and inserting the quick coupler
onto the coupler nipple and pushing
the quick coupler collar forward to
secure it.
STEP 4A: Grip spray gun and wand
handle securely.
Press the pump switch “ON” and
then pull trigger on the spray gun
to activate pressure switch which
starts machine. (For auto start ma-
chines only.)
When a steady stream of water
flows from the spray gun and wand,
turn the thermostat knob to the 200°
mark, then push the burner switch.
(Burner will light automatically.)
STEP 4B: For time delay shut down
machines simply press pump switch
“ON” and the machine will start.
Before installing pressure nozzle.
Run machine allowing water to flush
through the system until clear. Then
insert high pressure nozzle.
STEP 5: With spray nozzle pointed away from you or
anybody else, press trigger on spray gun to obtain
pressurized cold water spray.
Selection of high or low pressure is accompanied by
turning the handle.
NOTE: High pressure nozzle must
be inserted at end of wand to obtain high pressure.
To apply soap read operator’s manual. Note: Engage
safety latch when inserting high pressure nozzle to
prevent from triggering gun.
Variable Pressure
Control Handle
Trigger
Variable Pressure
Wand (VP)
High
Pressure
Nozzle
Brass Soap
Nozzle
89139320-2
89139320-9
Pump
Switch
Burner
Switch
Temp.
Control
Knob
Safety
Lock
Wand
Trigger
Gun
High Pressure
Hose
Summary of Contents for SEHW6-3500
Page 36: ......
Page 38: ...Form 8 913 932 0 Revised 02 12a Printed in U S A...