background image

6

Safety

Important Safety Information

WARNING: To reduce the risk of 
injury, read operating instructions 
carefully before using.

AVERTISSEMENT: Pour réduire le 
risque de blessures, lire attentive-
ment les instructions de 
fonctionnement avant l'utilisation

1. Read the owner's manual thor-

oughly. Failure to follow instruc-

tions could cause malfunction of the machine and 
result in death, serious bodily injury and/or property 
damage.

2. Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

3. Stay alert — watch what you are doing.

4. All installations must comply with local codes. 

Contact your electrician, plumber, utility company 
or the selling dealer for specific details. If your 
machine is rated 250 volts or less, single phase a 
ground fault circuit interrupter (GFCI) will be 
provided. If rated more than 250 volts, or more 
than single phase this product should only be 
connected to a power supply protected by a GFCI.

DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of electro-
cution. Check with a qualified electrician or service 
personnel if you are in doubt as to whether the 
outlet is properly grounded. Do not modify the plug 
provided with the product - if it will not fit the outlet, 
have a proper outlet installed by a qualified electri-
cian. Do not use any type of adaptor with this 
product

DANGER: Une mauvaise connexion du conducteur 
de terre de l'équipement peut entraîner un risque 
d'électrocution. Vérifier auprès d'un électricien 
qualifié ou du personnel d'entretien si vous avez 
des doutes quant à savoir si lasortie est 
correctement mise à la masse. NE PAS modifier la 
fiche fournie avec le produit - si elle n'entre pas 
dans la sortie, faire installer une sortie appropriée 
par un électricien qualifié. NE JAMAIS utiliser un 
adaptateur avec ce produit.

WARNING: Keep wand, hose, and 
water spray away from electric 
wiring or fatal electric shock may 
result.

AVERTISSEMENT: Garder la 
lance, le boyau et le jet d'eau à 
l'écart de tout câblage électrique 
ou des chocs électriques mortels 
pourraient survenir

5. To protect the operator from electrical shock, the 

machine must be electrically grounded. It is the 
responsibility of the owner to connect this machine 
to a UL grounded receptacle of proper voltage and 
amperage ratings. Do not spray water on or near 
electrical components. Do not touch machine with 
wet hands or while standing in water. Always 
disconnect power before servicing.

WARNING: Flammable liquids can create fumes 
which can ignite, causing property damage or 
severe injury.

AVERTISSEMENT: Des liquides inflammables 
peuvent produire des vapeurs qui peuvent 
s'enflammer, causant ainsi des dommages à la 
propriété ou des blessures graves.

WARNING: Risk of explosion — 
Operate only where open flame or 
torch is permitted.

AVERTISSEMENT: Risque d'explo-
sion- Utiliser uniquement dans des 
endroits où l'utilisation d'une 
flamme nue ou d'une torche est 
permise.

6. In oil burning models, use only 

kerosene, No. 1 home heating fuel, or diesel. If 
diesel is used, add a soot remover to every tankful.

WARNING: Risk of fire — Do not 
add fuel when the product is 
operating or still hot. 

AVERTISSEMENT: Risque 
d'incendie -Ne pas ajouter de 
carburant pendant que la machine 
fonctionner ou est encore chaude.

WARNING: Do not use gasoline 
crankcase draining or oil 

containing gasoline, solvents or alcohol. Doing so 
will result in fire and/or explosion.

AVERTISSEMENT: Ne pas utiliser d'essence, de 

Landa PHW Operator’s Manual   8.917-417.0 - D

WARNING

    READ OPERATOR’S 

 MANUAL THOROUGHLY 

           PRIOR TO USE.

OPERATIONS

SAFET

Y

MAINTENANCE

       

KEEP WATER 

 SPRAY AWAY FROM 

ELECTRICAL WIRING.

WARNING

WARNING

RISK OF EXPLOSION: 

OPERATE ONLY WHERE 

OPEN FLAME OR TORCH 

IS PERMITTED

WARNING

RISK OF FIRE. 

DO NOT ADD FUEL 

WHEN OPERATING

MACHINE.

Summary of Contents for PHW3-11024



























Reviews: