12
Operations
Assembly Instructions
STEP 1:
Attach a 3/4" garden hose
to inlet connector. Minimum flow
should be 5 gpm.
STEP 4:
Check oil level on sight
glass on side of pump. Oil should
be visible one-half way up sight
glass (SAE 10W-40 non-foaming).
The oil level can also be checked
by using the dipstick on the top of
the pump.
STEP 2:
Attach high pressure hose
to discharge nipple using quick
coupler. Lock coupler securely into
place by pulling back coupler collar
and inserting it onto discharge
nipple, then pushing collar forward
to lock in place.
NOTE:
If using detergent injector,
attach detergent injector to
discharge nipple using quick
coupler. Attach high pressure hose
to other end of detergent injector.
STEP 5:
Fill gasoline tank and
check engine oil. Fill fuel tank. Do
not confuse gasoline and fuel oil
(diesel) tanks. Keep proper fuel in
proper tanks.
STEP 3:
Attach wand to spray gun
using teflon tape on threads to
prevent leakage. Attach swivel
connector on discharge hose to
spray gun using teflon tape on
threads. Attach swivel connector on
high pressure hose to spray gun
using teflon tape on threads.
Engage safety latch to prevent from
triggering gun.
STEP 6:
On electric start models
only, you will need to install a
battery making sure that the red
cable is attached to the positive
terminal. Use a Group U1 garden
tractor style type of battery rated for
300 CCA (battery not included).
CAUTION: These machines are
intended to be protected from
outside environments.
ATTENTION: Ces machines sont
conçues pour être protégées
contre l'environnement
extérieur.
Landa MHC 9.800-950.0 - BM
Inlet
Connector
Inlet
Connector
Water Supply Hose
(not included)
For: MHC3-24324
C435
00E
High Pressure Hose
Discharge Nipple
Detergent
Hose
Detergent
Injector
SenDEC
TACH/
HOU
R
1/1
0
MHC43500
E
Gasoline
Fuel
Oil
Safety
Latch
High
Pressure
Hose
Spray
Gun
Wand
Dipstick
POS
NEG
Red
Black
