11
Operations
Assembly & Operation
Instructions
STEP 8:
STOP!
Read operator’s
manual before operating this
machine. Failure to read operation
and warning instructions may result
in personal injury or property
damage. Connect water supply
hose to inlet connector and turn
water on.
STEP 9:
Before installing nozzle,
turn on water supply and run
machine, allowing water to flush
through the system until clear. Turn
pump switch ON or turn knob to
pump position. When a steady
stream of water flows from the
spray gun and wand, the machine
is ready for the high pressure
nozzle to be installed. Turn the
variable pressure control handle
clockwise to raise the pressure. For
hot water washing, turn the burner
switch and thermostat ON or turn
three position switch knob to the
burner position. (The burner will
light automatically.)
Landa HOT Series Operator’s Manual 8.917-208.0 - B
Pump/Burner
Knob
Burner
Switch
Pump
Switch