7
Section 2: Maintenance & Lubrication
10/11/06
ZT60 and ZT72 Zero Turn Radius Mowers Riding Mowers Accu-Z
®
357-103SM
Land Pride
Section 2: Maintenance & Lubrication
Maintenance Locations
Your Accu-Z riding mower is designed with innovative
and state-of -the art components that should be
maintained. Knowing the location and how to maintain
these components is the best prevention for costly
downtime or expensive, premature repair. Become
familiar with the components listed below. Most will be
reviewed in this section.
Top View of Deck
Figure 2-1
1
7
2
1
4
6
8
3
5
24517
Bottom view of Deck
Figure 2-2
9
10
23977
Refer to Figure 2-1:
1.
Pulley Guards
2.
Over-Center Belt Tensioner
3.
Deck Belt Tensioner Spring
4.
Deck Belt
5.
Deck Tension Idler
6.
Anti-Scalp Wheels
7.
Blade Spindle Zerks (3)
(1)Uunder floor panel
(2) Through opening in pulley guards
8.
Discharge Chute
Refer to Figure 2-2:
9.
Cutting Blades
10. Deck Underside
Refer to Figure 2-3:
11. Engine Oil Fill & Dipstick
(Located under air cleaner mount.)
12. Engine Oil Drain Plug
(Located under air cleaner mount.)
13. Engine Oil Filter
14. Engine Oil Cooler
15. Engine Air Cleaner
16. Fuel Filter
17. Hydraulic Oil Filter (2)
18. Seat Release Latch
19. Hydraulic Oil Expansion Tank (2)
(For level check and adding oil.)
20. Battery (located under seat)
21. Operator Presence Switch
(Located under seat.)
22. Reservoir Cover (2)
23. Hydraulic Oil Fill Plug (2)
(For initial fill & oil changes only.)
24. Gauge Wheel Bearing Zerk (2)
25. Pivot Grease Zerk
(Located under axle.)
26. Floor Panel
27. Floor Panel Lift Handles
28. Left/Right Fuel Tank Valve
(May be located on either side)
29. Seat Adjustment Latch
Refer to Figure 2-4:
30. Hydraulic Oil Drain Plug (2)
31. Electric Clutch Pulley
32. Ground Drive Belt
33. Ground Belt Tension Idler
34. Ground Belt Tension Idler Spring
35. Deck Lift Pivot Zerks (4)
36. Axle Pivot Pins (2)
37. Gauge Wheels (2)
38. Drive Wheels (2)