25
7/25/13
RTA10 & RTA15 Series Rotary Tillers 311-252M
Section 4: Maintenance & Lubrication
Lubrication
Driveline U-Joint
Type of Lubrication: Multi-purpose Grease
Quantity = As required
Driveline Shaft
Disconnect driveline shaft from the tractor and slide apart.
Clean and coat the inner tube of the driveline shaft with a
light film of grease and then reassemble.
Type of grease = Multi-Purpose
Quantity = Coat Generously
8
Hrs
20
Hrs
14191
14190
30049
20
Hrs
Multi-purpose
spray lube
Multi-purpose
grease lube
Multi-purpose
oil lube
Intervals in hours at which
lubrication is required
Lubrication
Legend
Chain
c
ase
Shell Gadus S2 V220 00 flowable grease
Quantity when empty: 20 oz (0.59 L)
Quantity when low: Oil should reach bottom of level
plug hole when in the liquid state.
IMPORTANT:
Check oil level after the machine
has been operating long enough to cause oil to
become hot and fluid. Level machine and remove
lower level plug. Oil should reach bottom of level
plug hole. If needed, add recommended lubricant
through the level hole or fill hole. Tighten all
As
Required