24
Section 2: Assembly of Optional Equipment
RCR2596, RCR2510, and RCRM2510 Rotary Cutters 312-753M
7/29/20
Section 2: Assembly of Optional Equipment
Chain Safety Guards (Optional)
DANGER
!
To avoid serious injury or death:
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front & rear safety guards is
mandatory with this cutter. Stop blade rotation if bystanders
are in or around the area. It is recommended that a safety
shield be placed between the operator and cutter on an open
WARNING
!
To avoid serious injury or death:
Keep all safety guards in place. Rotary Cutters have the
ability to discharge objects at high speeds. Use extreme
caution when cutting in areas where people may be present. It
is best to operate the cutter when no one is nearby. Stop blade
rotation if someone is in or around the area.
Front Chain Guards
RCR2596 & RCRM2596
Refer to Figure 2-1:
Install each front chain shield (#1) with 1/2-13 x 2 3/4"
long carriage bolts (#2) and flange nuts (#3) as shown.
Front Chain Guards
RCR2510 & RCRM2510
Refer to Figure 2-2:
Install front chain shields (#1) & (#2) with
1/2" -13 x 3 1/2" long carriage bolts (#3) and flange
nuts (#4) as shown.
Rear Chain Guards
Refer to Figure 2-3:
Install rear chain shield (#1) with 1/2" -13 x 1 1/2" long
carriage bolts (#2) and 1/2" flange nuts (#3) as shown.
NOTE:
Do not tighten hardware until assemblies
are complete. Refer to
“Torque Values Chart”
on
RCR2596 Front Chain Shield
Figure 2-1
RCR2510 & RCRM2510 Front Chain Shield
Figure 2-2
Rear Chain Shield
Figure 2-3
22292
22291
16258
