Land Pride RCP2760, Operator'S Manual

Page: 21 / 78

Section 1: Assembly & Set-up
Table of Contents
3/12/21 RCP(M)2760 & RCP(M)3760 Parallel Arm Rotary Cutter 316-548M
17
RCP2760 & RCPM2760 Minimum Tractor Requirements
Refer to
“Weight”
and
“Wheel Base”
on page 16
Figure 1-1
RCP3760 & RCPM3760 Minimum Tractor Requirements
Refer to
“Weight”
and
“Wheel Base”
on page 16
Figure 1-2
Tractor cab or roll over
protective structure
Operator
protective
shield
8,000 LBS.
(3,630 kg) MIN.
47" MAX
(119 cm)
74" (188 cm) MIN
12250
Required
left-hand dual or
left-hand
wheel weights
12,000 lb
(5,445 kg) MIN.
Tractor cab or roll over
protective structure
Operator
protective
shield
47" MAX
(119 cm)
95" (241 cm) MIN
24583
Protective Equipment Requirements
Refer to Figure 1-1 & Figure 1-2:
The tractor MUST be equipped with protective equipment
designed to shield the operator from thrown objects and
tractor rollover. An enclosed tractor cab with a Roll Over
Protective Structure (ROPS) may qualify. See the
tractor’s manual to see if it qualifies.
Tractors with only a ROPS must have a protective shield
added to the right-hand fender. A universal operator
protective shield is available from Land Pride. Refer to
page 51 for additional information and installation.
It is also recommended that a protective shield or screen
be added to the right-hand side of the tractor engine
cowling and radiator. This will help protect the tractor’s
finish and radiator against thrown objects.