19
Section 3: Hydraulics
4/28/08
RCP2560 & RCPM2560 Series Parallel Arm Rotary Cutter 316-057M
Land Pride
The hydraulic pump/motor circuit is shown in
Figure 3-3. It operates via a tractor driven PTO and is
not connected to tractor hydraulics. The pump receives
fluid from a 35 gallon reservoir. If the cutter blades are
stalled, an overpressure relief valve opens to provide a
return path to the reservoir.
Marking Hydraulic Line Lengths
Hydraulic lines are marked to length from motor to
pump and pump to motor as outlined in Figure 3-4
below.
Tie Strap
Return Line
Pressure Line
**Twist return hose (811-404C) counter-
clockwise until it follows the same
contour as pressure hose
(811-403C).
Pressure Line
Outer End
Hose Locations for Hydraulic
Pump and Motor
Figure 3-4
*Orient 811-411C
Hyd. Fittings so they
are 45˚ down
towards deck
13776
Hydraulic Pump Motor Circuit
Figure 3-3
12262
