![background image](http://html1.mh-extra.com/html/land-pride/rcm4610/rcm4610_operators-manual_3521611013.webp)
Section 1: Assembly and Set-Up
RCM4610, CA0548 & CA0556 Core Aerators 325-108M
12/11/18
9
CA0556 Rotor Shaft Assembly
These instructions are for the 56" Aerator. See
on page 7 for 48" Aerator and
on page 8 for 48"
Aerator.
1.
Turn hitch and weight tray upside down and orient as
shown. Position end panel (#1A) on the left end of the
weight tray to begin assembly of the rotor shaft.
2. Insert rotor shaft (#5) in end panel (#1A)
3. Install 1" flat washer (#6A), gang assembly (#2A),
1" flat washer (#6), spacer (#4), and second flat
washer (#6) on rotor shaft (#5).
4. Install gang assembly (#2B), 1" flat washer (#6),
center support (#3), and second flat washer (#6) on
the rotor shaft.
IMPORTANT:
Make sure all gang assemblies (#2)
are installed on rotor shaft (#5) with the open side of
the spoons facing forward in rotation as shown.
5. Install gang assembly (#2C), 1" flat washer (#6),
spacer (#4), and second flat washer (#6) on the rotor
shaft.
6. Install gang assembly (#2D), 1" flat washer (#6),
spacer (#4), and second flat washer (#6) on the rotor
shaft.
7.
Install gang assembly (#2E), 1" flat washer (#6),
center support (#3), and second flat washer (#6) on
the rotor shaft.
8. Install gang assembly (#2F), 1" flat washer (#6),
spacer (#4), and second flat washer (#6) on the rotor
shaft.
9. Install gang assembly (#2G) and 1" flat washer (#6B)
on the rotor shaft.
10. Install end panel (#1B) on the right end of the rotor
shaft (#5).
CA0548 Rotor Shaft Assembly
Figure 1-6
30016
Direction of
Rotation