![background image](http://html.mh-extra.com/html/land-pride/rc5014/rc5014_operators-manual_672964039.webp)
37
Section 7: Features and Benefits
2/02/08
RC5014 (540 RPM) and RCM5014 (1000 RPM) Rotary Cutters 330-117M
Land Pride
RC5014 and RCM5014
Features
Benefits
Surpass rugged industry
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
Total cutter weight
Weight is in a range that will allow tractors to handle the cutter easier. Heavier cutters are
tough to control.
Fully welded deck
Fully welded deck adds strength.
Factory assembled
Saves customer set-up time and money.
5 Year gearbox warranty
Shows confidence in gearbox.
250 HP splitter gearbox
High gearbox rating for rough work and high horsepower tractors.
210 HP blade gearboxes
High gearbox rating for 3" cutting capacity and high horsepower tractors.
Gearbox seal protection
Gearbox bottom seal protection for longer bearing life.
2 3/8” Output gearbox shaft
Large output shaft handles shock loads better.
540 or 1000 RPM PTO speed
Fits wide variety of tractors including high horsepower tractors.
Cat. 5 Input driveline
Holds up to shock loads and harsh mowing conditions.
Fits wide range of tractors including high horsepower tractors.
Star profile drivelines
Star profile spreads load out to many points on the shaft. More apt to resist bending and
twisting under shock loads and harsh mowing conditions.
Easy greasable drivelines
Drivelines have access holes for greasing the U-joints in the driveline and to grease the inner
profiles.
4 Plate slip-clutch
Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline
when impacts are encountered.
Keyed blade bolt
Makes removing the cutting blades easier.
Thru-harden blades
Provides longer life than standard heat treating.
High blade tip speed
540 rpm: Center: 17,377 fpm, Wings: 17,329 fpm
1000 rpm: Center: 18,165 fpm, Wings: 15,013 fpm
Allows for a clean cut of material and even distribution.
6” Blade overlap
Generous blade overlap eliminates skipping, especially in turns.
High cutting capacity
Can cut brushy areas with saplings up to 3”.
10 1/2” Deck height
Handles heavy cutting, which reduces balling-up of cut material under the deck.
2” - 14” Cutting height
Vary cutting height on the go for varied conditions.
3/16” Stump jumper backed
with a 1" thick mounting bar
Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough
conditions.
3/16” Deck thickness
Heavy enough to handle conditions but not weigh unit down.
1/4” Side skirt thickness
Extra thick on sides to handle debris contact.
Skid shoes
Wing & weight box skid shoes can be reversed for extended life.
Wing, weight box and center deck skid shoes can be replaced when damaged or worn out.
Self-leveling pull-type hitch
Reduces drawbar wear by keeping hitch level while going through ditches.
Section 7: Features and Benefits