Section 7: Features & Benefits
7/31/20
RC4620 & RCM4620 Rotary Cutters 331-936M
61
Section 7: Features & Benefits
RC4620 & RCM4620 Models
Features
Benefits
Surpassed rugged
industry standards
All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254-13.
Factory assembled
Saves customer set-up time and money. Adjustments should always be made by dealer.
7 Year gearbox warranty*
Shows confidence in gearbox integrity. Years 6 & 7 parts only
250 hp divider gearbox
210 hp center & wing gearboxes
Rugged heavy-built gearboxes capable of handling heavy-cutting applications.
Gearbox seal protection
Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft
Large output shaft handles shock loads better.
Input driveline: Cat. 6 CV
Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Easy greasable drivelines
Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
4 Plate slip-clutch
Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline
when impacts are encountered.
High blade tip speed
Allows clean cutting of material & even distribution. See Specifications for actual FPM.
6" Blade overlap
Eliminates skipping during turns.
Good cutting capacity
Can cut brushy areas with saplings up to 3".
13" Deck height
Handles heavy cutting, which reduces balling-up of cut material under the deck.
Diamond shaped blade holder
Heavy diamond shaped blade holder for protecting the gearbox seal and gearbox
output shaft. Can hold up to tough conditions.
Optional dishpan
Dishpan provides extra protection against stumps and other protrusions. Excluding the
dishpan eliminates grass/dirt buildup which can cause vibration.
Spindle Nut Protected
Spindle nut and threads extending beyond the nut are guarded to protect against
damage from hitting solid objects.
Shredder Blade Kit (Optional)
Ideal for cutting residue into smaller pieces.
Replaces standard blade bar/dish configuration.
10 gauge smooth deck top
Reduces accumulation of debris and is easier and faster to clean.
1/4" side skirt
Reduces debris piercing possibilities.
Self-leveling hitch
Reduces drawbar wear by keeping hitch level while going through ditches.
LED Signal lights
Lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Hinged wing sections
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rods
Larger diameter hinge gives greater strength to
cutter
and hinge area.
Wing transport locks
Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling
rods
Dual leveling rods enable the
cutter
to pull equally on the rear axle during travel over
rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims
Allows water to drain from wheels mounted on folded-up wings.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned center axle
Protects unit from bumps and ground shock, cushions loads on drawbar.
Replaceable wheel spindles
Wheel spindles can be replaced when damaged without replacing the entire axle.
Simply remove one bolt to replace damaged spindle.
Rephasing lift cylinders
Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles.
7/8" Leveling rods
Large diameter leveling rods provide superior supporting strength over rough terrain.