Introduction
RBT6010 & RBT6012 Rear Blades 301-360M
11/27/18
6
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your 3-Way Rear Blade have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new 3-
Way Rear Blade. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
27862
Land Pride welcomes you to the growing family of new
product owners. This 3-Way Rear Blade has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance, and
safe operating practices will help you get years of
satisfactory use from this machine.
Application
Land Pride’s RBT60 Series 3-Way Hydraulic Rear Blades
are built tough from the ground up for leveling, finish
grading, and backfilling applications involving roadwork,
construction, landscaping, drainage ditches, nurseries,
feedlot cleaning, farm use, and snow removal.
The RBT60 Series Rear Blades are designed for
Cat.II & Cat. III 3-Point hitches and are compatible with
Land Pride’s QH20 Quick Hitch. They are available in
10 ft. widths (RBT6010) and 12 ft widths (RBT6012).
Tractor horsepower rating for the RBT6010 should not
exceed 225 hp on 2-wheel drive tractors and 200 hp on 4-
wheel drive tractors. Horsepower rating for the RBT6012
should not exceed 175 hp on 2-wheel drive tractors and
160 hp on 4-wheel drive tractors.
The 19" tall rolled moldboard with its grader blade can be
angled left or right up to 45
o
, the ends can be tilted up or
down by as much as 15
o
, and the whole blade can be
offset to the left or right by as much as 55". The blade can
also be rotated 180
o
for blading in reverse with the same
angling, tilting, and offset capabilities. A retractable park
stand is included to make blade removal, storage, and
reattachment easier.
Available accessories includes hydraulic controlled dual
gauge wheels for good depth control, end plates for
holding material and skid shoes for blade protection.
See
“Specifications & Capacities”
“Features & Benefits”
on page 29 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
